Frontier Poli-Void Instructions:
To determine the width needed, check the coping. If you have just the depth of the coping use the one and one-half inch. If the bond beam is notched, or goes straight down from the bottom of the coping use the three inch.
With the 3/8" tear strip in an upward position, apply adhesive one-half inch below the tear strip section so as not to interfere with the bonding of the joint sealant. The concrete is poured to the opposite side and edged with a 1/4" edger. The deck (surface) should be allowed to cure before the 3/8" tear strip is removed and the FRONTIER SEAL is poured to fill the void
|