|
(Check all local codes to determine suitability of this profile)
Stegmeier's Cantilever Forms are foam forms that attach to the tile on gunite pools and secured with double face tape and tie wires. Set up time is minimal (usually the morning of the pour) and they may be removed early while the concrete is still wet enough to "slick finish" with a foam profile edging tool. The tie wires are positioned approximately 14" apart and are designed to break away at a pre determined point 2" deep into the concrete edge.
Flexibility Stegmeier's forms conform easily to most free-form designs but can be bent down to a tight radius using the bending tape provided.
|