|
|
|
 |
| Expansion
Control Joints |
 |
|
Frontier Poli-Void
|
|
Frontier Poli-Void is a flexible Poly Ethylene expansion material used in providing the full expansion joint necessary to separate precast coping stones, brick coping or other pool copings from the concrete pool deck. This product has a 3/8 inch tear away that prepares the joint for Stegmeier's Frontier Seal.
Physical Properties
Compression,
psi
at 10% deflection - less than 10
at 80% deflection - less than 125
|
Water Absorption
% of volume - less than 0.5 |
Moisture Vapor
Permeability
perm inches - less than 0.4
|
Density
Pounds/ft. ³ - 2.4 - 2.8 |
Temperature Stability
18º to 150º |
|
|
  |
|
Click
here for Instructional Video
| Part # |
Size |
RLS Per Bundle |
| PV11B |
1/4"
x 1-1/2" x 120' |
32 |
| PV12B |
1/4" x 3"
x 120' |
16 |
| PV13B |
1/2"
x 1-1/2" x 60' |
32 |
| PV14B |
1/2" x 3"
x 60' |
16 |
| PV15B |
1/4"
x 4" x 120' |
12 |
| PV16B |
1/2" x 4"
x 60' |
12 |
| PV11B-BAG
|
Bagged
1/4" x 1-1/2" x 120' |
32 |
| PV12B-BAG |
Bagged 1/4"
x 3" x 120' |
16 |
| PV13B-BAG |
Bagged
1/2" x 1-1/2" x 60' |
32 |
| PV14B-BAG |
Bagged 1/2"
x 3" x 60' |
16 |
| PV15B-BAG |
Bagged
1/4" x 4" x 120' |
12 |
| PV16B-BAG |
Bagged 1/2"
x 4" x 60' |
12 |
| PV11B-BAG-4
|
Bagged
1/4" x 1-1/2" x 120' |
8 |
| PV12B-BAG-4 |
Bagged 1/4"
x 3" x 120' |
4 |
| PV13B-BAG-4 |
Bagged
1/2" x 1-1/2" x 60' |
8 |
| PV14B-BAG-4 |
Bagged 1/2"
x 3" x 60' |
4 |
| PV15B-BAG-4 |
Bagged 1/4"
x 4" x 120' |
4 |
| PV16B-BAG-4 |
Bagged 1/2"
x 4" x 60' |
4 |
| |
Frontier Poli-Void Instructions:
To determine the width needed, check the coping. If you have just the depth of the coping use the one and one-half inch. If the bond beam is notched, or goes straight down from the bottom of the coping use the three inch.
With the 3/8" tear strip in an upward position, apply adhesive one-half inch below the tear strip section so as not to interfere with the bonding of the joint sealant. The concrete is poured to the opposite side and edged with a 1/4" edger. The deck (surface) should be allowed to cure before the 3/8" tear strip is removed and the FRONTIER SEAL is poured to fill the void
|
|
|
|
|
|
