|
With Stegmeier Foam Step Liners, shaping overhangs
becomes a snap. Use spray adhesive and/or
roofing tacks to fasten Step Liners to the
inside of formwork. Radius steps may be formed by attaching Step Liners to Slip-n-Join Lumber (a reusable plastic bender board by Stegmeier Corporation). Break-away slots allow for three (3)
riser heights. Step Liners may be stripped and finished much
earlier than conventional forms.
|
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}