Follow Us:

Stegmeier’s Cantilever forms are foam forms that attach to the tile on gunite (or one-piece fiberglass) pools and secured with double face tape and tie wires. Set up time is minimal (usually the morning of the pour) and they may be removed early while the concrete is still wet enough to “slick finish” with a foam profile edging tool. The tie wires are positioned approximately 6″ apart and are designed to sever below the surface of the concrete. Check local building codes before using this product.

Stegmeier’s forms conform easily to most free-form designs but can be bent to a tight radius using the bending tape provided.





Click here for Instruction Sheet

Part # 6″ Capstone Profile
69CF000 Form Only
69CF011 White Tile Strip – No Tie Wire
69CF111 Tie Wire – No Tile Strip
69CF112 White Tile Strip
69CF122 Grey Tile Strip
69CF132 Tan Tile Strip
69CF162 Black Tile Strip
10 Capstone Form (8′ lengths)
10 Tile Strip (8′ lengths)
2 Tie Wire Side Kit

Contact us for the latest info